A thermal Activation Device, also called a thermal activation generator, is an automatic unique thermal detection and activation device that allows to detection of a fire, tulekustutusseadme aktiveerimiseks, see töötab koos kõik tulekustutussüsteemid.
This device is a visible installation type, when the environment temperature arrives at the device’s rated temperature, after waiting a time delay of 15 juurde 99 sekundit, it can cause an instantaneous current to the fire extinguishing units to make them work.
Adding a magnetic switch at the wire-connection box can help transmit the activation signal feedback to the fire extinguishing system. inside the wire-connection box is accompanied by an indicator, and circuit board, when the device has voltage output, indikaatortuli tõstab esile, and a photoelectric switch can help transmit the signal to the fire extinguishing systems.
Toote parameetrid:
tootenimi: termilise aktiveerimise seade, termilise aktiveerimise generaator, lühidalt on “TAD, TAG, TG”. “TAD” on lühend “Termilise aktiveerimise seade”, “TAG” on lühend “Termilise aktiveerimise generaator”, ja “TG” on lühend “Thermal Generator”.
Product Dimension: Φ65 * 139 millimeetrit.
Töötemperatuur: -60 juurde +60 kraadi Celsiuse järgi.
Ühilduvus: aerosool, vaht, vesi-udu, kuiv kemikaal, and gas system.
Tööpõhimõte: Utilizing the principle of electromagnetic induction to generate current and activate the fire extinguisher.
This thermal activation generator is an accessory of fire suppression systems of aerosol fire extinguishers and dry chemical fire suppression units.
The Thermal activation generator not only takes the role of fire detection element but also takes the role of starting the fire suppression systems, sellel on järgmised funktsioonid:
It can be used as a standard thermal detection element with a fire temperature reading.
It can be connected to the standard fire control panel of a fire alarm system by use of an additional electronic box.
Complied with an explosion-proof junction box TAD can be used in a safety sensor D3 for application in hazardous areas.
Seade TAD sobib väga hästi autonoomseks käivitamiseks tulekustutussüsteemis.
Välist toiteallikat pole vaja.
See võib töötada koos tulekahjusignalisatsioonisüsteemidega, et töötada tulekahju avastamiseks.
It can operate separately, teisisõnu, it is also a stand-alone detection accessory for fire protection.
Work alone with fire suppression system generators without any outer power supply, ja saab ka töötada tulekahjusignalisatsioonisüsteemid, below are its partners:
Aerosoolkustuti ja süsteemid.
Kuivkeemiline pulbertulekustuti ja süsteemid.
Fm200 tulekustutussüsteemid.
Süsinikdioksiidiga tulekustutussüsteemid.
RAHA 1230 or FK5-1-1-2 fire protection systems.
Inertgaasiga IG541 tuletõkkesüsteemid.
Vahuga tulekustutussüsteemid.
Vee-uduga võitlemise süsteemid.
Muud suhtelised tulekustutussüsteemid.
When the device detects that the ambient temperature has reached the activation temperature, the thermosensitive head melts, and the internal magnetic components move under the pressure of the compression spring. The inductance coil ignites the current to ignite thefire extinguisher generator.
Please note the following:
Volume protected by one device shall not exceed 18 kuupmeetrit.
The thermal activation device should be installed in a protected area 50 juurde 200 mm below the ceiling.
The thermal activation generator is suitable for application in hazardous areas of 2ExeIIT6 category.
Its maximum relative humidity is 98% (mittekondenseeruv).
The startup temperature of this device can also be customized specifically for customers.
Pärast paigaldamist, the safety pin of the device should be promptly removed.
Selle kohta rohkem tehnilisi üksikasju Termilise aktiveerimise seade, palun küsi meie käestand we will respond to you within 24 tundi.
Päringuvorm ( võtame teiega esimesel võimalusel tagasi )
