A thermal Activation Device, also called a thermal activation generator, is an automatic unique thermal detection and activation device that allows to detection of a fire, om die blusapparaat te aktiveer, dit werk met alle brandblusstelsels.
This device is a visible installation type, when the environment temperature arrives at the device’s rated temperature, after waiting a time delay of 15 om 99 sekondes, it can cause an instantaneous current to the fire extinguishing units to make them work.
Adding a magnetic switch at the wire-connection box can help transmit the activation signal feedback to the fire extinguishing system. inside the wire-connection box is accompanied by an indicator, and circuit board, when the device has voltage output, die aanwyser lig hoogtepunte, and a photoelectric switch can help transmit the signal to the fire extinguishing systems.
produk Parameters:
Produk Naam: termiese aktivering toestel, termiese aktiveringsopwekker, vir kort is “DAN, TAG, TG”. “DAN” is kort vir “Termiese toestel te aktiveer”, “TAG” is kort vir “Termiese Aktivering Generator”, en “TG” is kort vir “termiese Generator”.
Verenigbaarheid: aerosol, skuim, watermis, droë chemiese, and gas system.
werkbeginsel: Utilizing the principle of electromagnetic induction to generate current and activate the fire extinguisher.
This thermal activation generator is an accessory of fire suppression systems of aerosol fire extinguishers and dry chemical fire suppression units.
The Thermal activation generator not only takes the role of fire detection element but also takes the role of starting the fire suppression systems, dit het onderstaande kenmerke:
It can be used as a standard thermal detection element with a fire temperature reading.
It can be connected to the standard fire control panel of a fire alarm system by use of an additional electronic box.
Complied with an explosion-proof junction box TAD can be used in a safety sensor D3 for application in hazardous areas.
Die toestel TAD is baie geskik vir outonome bediening in 'n brand onderdrukking stelsel.
Geen eksterne kragtoevoer word benodig nie.
Dit kan saam met brandalarmstelsels werk om vir brandopsporing te werk.
It can operate separately, in other words, it is also a stand-alone detection accessory for fire protection.
Work alone with fire suppression system generators without any outer power supply, en ook mee kan werk vuur alarmstelsels, below are its partners:
Aerosol brandblusser en stelsels.
Droë chemiese poeier brandblusser en stelsels.
Fm200 brand onderdrukking stelsels.
Koolstofdioksied brandblusstelsels.
NOVEC 1230 or FK5-1-1-2 fire protection systems.
Inerte gas IG541 brandbeskermingstelsels.
Skuimbrandonderdrukkingstelsels.
Watermisbestrydingstelsels.
Ander relatiewe brandblusstelsels.
When the device detects that the ambient temperature has reached the activation temperature, the thermosensitive head melts, and the internal magnetic components move under the pressure of the compression spring. The inductance coil ignites the current to ignite thefire extinguisher generator.
Please note the following:
Volume protected by one device shall not exceed 18 kubieke meter.
The thermal activation device should be installed in a protected area 50 om 200 mm below the ceiling.
The thermal activation generator is suitable for application in hazardous areas of 2ExeIIT6 category.
Its maximum relative humidity is 98% (nie-kondenserend).
The startup temperature of this device can also be customized specifically for customers.
Na die installasie, the safety pin of the device should be promptly removed.
Vir meer tegniese besonderhede oor hierdie Termiese toestel te aktiveer, asseblief inquire from usand we will respond to you within 24 ure.
Enquiry Form ( ons sal terug te kry wat jy so gou as moontlik )
