A thermal Activation Device, also called a thermal activation generator, is an automatic unique thermal detection and activation device that allows to detection of a fire, yangın söndürme cihazını etkinleştirmek için, ile çalışır tüm yangın söndürme sistemleri.
This device is a visible installation type, when the environment temperature arrives at the device’s rated temperature, after waiting a time delay of 15 için 99 saniye, it can cause an instantaneous current to the fire extinguishing units to make them work.
Adding a magnetic switch at the wire-connection box can help transmit the activation signal feedback to the fire extinguishing system. inside the wire-connection box is accompanied by an indicator, and circuit board, when the device has voltage output, gösterge ışığı vurgular, and a photoelectric switch can help transmit the signal to the fire extinguishing systems.
uyumluluk: aerosol, köpük, su sisi, kuru kimyasal, and gas system.
Çalışma prensibi: Akım üretmek ve yangın söndürücüyü etkinleştirmek için elektromanyetik indüksiyon prensibini kullanma.
This thermal activation generator is an accessory of fire suppression systems of aerosol fire extinguishers and dry chemical fire suppression units.
The Thermal activation generator not only takes the role of fire detection element but also takes the role of starting the fire suppression systems, aşağıdaki özelliklere sahiptir:
It can be used as a standard thermal detection element with a fire temperature reading.
It can be connected to the standard fire control panel of a fire alarm system by use of an additional electronic box.
Complied with an explosion-proof junction box TAD can be used in a safety sensor D3 for application in hazardous areas.
Cihaz TAD bir yangın söndürme sistemi içinde özerk harekete geçirilmesi için çok uygundur.
Harici güç kaynağı gerekmez.
Yangın algılama için çalışmak üzere yangın alarm sistemleri ile çalışabilir.
It can operate separately, Diğer bir deyişle, it is also a stand-alone detection accessory for fire protection.
Work alone with fire suppression system generators without any outer power supply, ve ayrıca çalışabilir Yangın alarm sistemleri, below are its partners:
Aerosol yangın söndürücü ve sistemleri.
Kuru kimyevi tozlu yangın söndürücü ve sistemleri.
FM200 yangın söndürme sistemleri.
Karbondioksitli yangın söndürme sistemleri.
NOVEC 1230 or FK5-1-1-2 fire protection systems.
İnert gaz IG541 yangından korunma sistemleri.
Köpüklü yangın söndürme sistemleri.
Su sisi önleme sistemleri.
Diğer ilgili yangın söndürme sistemleri.
When the device detects that the ambient temperature has reached the activation temperature, the thermosensitive head melts, and the internal magnetic components move under the pressure of the compression spring. The inductance coil ignites the current to ignite thefire extinguisher generator.
Lütfen aşağıdakilere dikkat edin:
Bir cihaz tarafından korunan hacim aşılmayacaktır 18 metreküp.
Termal aktivasyon cihazı korunan bir alana kurulmalıdır 50 için 200 tavanın mm altında.
Termal aktivasyon jeneratörü tehlikeli uygulamalar için uygundur
2ExeIIT6 kategorisinin alanları.
Maksimum bağıl nemi 98% (yoğunlaşmayan).
Bu cihazın başlatma sıcaklığı da müşteriler için özel olarak özelleştirilebilir.
Yüklemeden sonra, cihazın emniyet pimi derhal çıkarılmalıdır.
Bu konuda daha fazla teknik ayrıntı için Termal Aktivasyon Cihazı, Lütfen inquire from usand we will respond to you within 24 saatler.
Talep Formu ( Biz en kısa sürede size geri alacak )