Din Rail Fire Extinguisher Breaker is currently the most cost-effective firefighting equipment for switchboards. This is because, compared with similar products, they are the least expensive.
As a specialist manufacturer of fire extinguishers for distribution boards, we constantly explore new technologies and conduct research and development.
In less than a year, we have developed a range of fire extinguishers for distribution boards (switchgear), with extinguishing capacities ranging from 10 grams, 20 grams, and 30 grams to the current 40 grams.
Today, we’d like to introduce our newly developed 40-gram DIN Rail-Type fire extinguisher breaker for distribution boards.
40G Automatic DIN Rail Fire Extinguisher Breaker
The 40G rail-mounted distribution cabinet fire extinguisher has the following two distinctive features:
The aerosol fire-extinguishing dose is 40 grams. It covers an enclosed space of 0.4 cubic metres.
The nozzle is designed as a large-bore nozzle, enabling the extinguishing agent to be discharged promptly through the nozzle.
In addition, this product has the following basic characteristics and key specifications:
Product Name: DIN Rail Type Fire Extinguisher Breaker
Item Number: QRR0.04G/S/SA-EC.
Specification: 80*27*70 mm (Contains 3M double-sided adhesive tape).
Protection Volume: 0.4 cubic metres of space in the switchboard cabinet.
Aerosol Compound Release Time: 10 to 15 seconds.
Main Oxidant Content: Strontium Nitrate and Potassium Nitrate make up 60% to 80%.
Design Concentration: 100 grams per cubic meter.
Protection Volume: 0.12m³.
Packing: White box or special box design.
OEM/ODM and Private Labeling Service: Available for quantities over 1000 pieces.
Activation Mode: Thermal activation by thermal cord.
Thermal Cord Activation Temperature: 175℃.
Thermal Cord Length: Leave 10 centimetres on each side (standard); this can be extended in accordance with the customer’s specific requirements.
Application Scope: Meter boxes, switchgear, electrical cabinets, control panels, and other confined small spaces.
Test Video of 40G DIN Rail Extinguisher and How To Install
The above outlines the basic specifications of this product. For details of its fire-extinguishing performance, please watch the following YouTube video demonstrating its use:
If you want to know how to install the din rail series of aerosol fire extinguisher, please refer to below short video:
Although this product is very practical, we would like to draw your attention to the following points:
After release, do not touch the device before the casing cools down to avoid burns.
When the ambient temperature reaches 175℃±10℃, or when the thermal cord(the blue one) comes into contact with an open flame. It will start to extinguish the fire automatically. So it works without any additional power supply. It is fully automatic.
Do not disassemble this product privately without our permission.
This product is disposable; once the contents have been dispensed, it cannot be reused and must be replaced with a new one without delay.
We are specialist manufacturers of this product. Should you have any queries, please do not hesitate to contact us.
