Din Rail brandblusser Breaker is momenteel de meest kosteneffectieve brandbestrijdingsapparatuur voor schakelborden. Dit komt omdat, vergeleken met vergelijkbare producten, ze zijn het minst duur.
Als gespecialiseerde fabrikant van brandblussers voor verdeelborden, we constantly explore new technologies and conduct research and development.
In minder dan een jaar, wij hebben een assortiment brandblussers voor verdeelborden ontwikkeld (schakelapparatuur), met bluscapaciteiten variërend van 10 gram, 20 gram, en 30 gram ten opzichte van de stroom 40 gram.
Vandaag, we’d like to introduce our newly developed 40-gram DIN Rail-Type fire extinguisher breaker for distribution boards.
40G Automatic DIN Rail Fire Extinguisher Breaker
The 40G rail-mounted distribution cabinet fire extinguisher has the following two distinctive features:
The aerosol fire-extinguishing dose is 40 gram. It covers an enclosed space of 0.4 kubieke meter.
The nozzle is designed as a large-bore nozzle, enabling the extinguishing agent to be discharged promptly through the nozzle.
In aanvulling, this product has the following basic characteristics and key specifications:
productnaam: DIN Rail Type Fire Extinguisher Breaker
Item nummer: QRR0.04G/S/SA-EC.
Specificatie: 80*27*70 mm (Contains 3M double-sided adhesive tape).
bescherming Volume: 0.4 cubic metres of space in the switchboard cabinet.
Aerosol Compound Release Time: 10 tot 15 seconden.
Main Oxidant Content: Strontium Nitrate and Potassium Nitrate make up 60% tot 80%.
Ontwerpconcentratie: 100 gram per kubieke meter.
bescherming Volume: 0.12m³.
Inpakken: White box or special box design.
OEM/ODM and Private Labeling Service: Available for quantities over 1000 stukken.
Activeringsmodus: Thermal activation by thermal cord.
Thermal Cord Activation Temperature: 175℃.
Thermische snoerlengte: Leave 10 centimetres on each side (standaard-); this can be extended in accordance with the customer’s specific requirements.
Toepassingsgebied: Meterkasten, schakelapparatuur, elektrische kasten, controle panelen, and other confined small spaces.
Test Video of 40G DIN Rail Extinguisher and How To Install
The above outlines the basic specifications of this product. For details of its fire-extinguishing performance, please watch the following YouTube video demonstrating its use:
If you want to know how to install the din rail series of aerosol fire extinguisher, please refer to below short video:
Although this product is very practical, we would like to draw your attention to the following points:
Na vrijlating, do not touch the device before the casing cools down to avoid burns.
When the ambient temperature reaches 175℃±10℃, or when the thermal cord(the blue one) comes into contact with an open flame. It will start to extinguish the fire automatically. So it works without any additional power supply. It is fully automatic.
Do not disassemble this product privately without our permission.
This product is disposable; once the contents have been dispensed, it cannot be reused and must be replaced with a new one without delay.
We are specialist manufacturers of this product. Should you have any queries, Aarzel niet om contact met ons op te nemen.
