Protupožarni prekidač za din šinu trenutno je najisplativija oprema za gašenje požara za centrale. Ovo je zato što, u usporedbi sa sličnim proizvodima, oni su najjeftiniji.
Kao specijalizirani proizvođač aparata za gašenje požara za razvodne ormare, we constantly explore new technologies and conduct research and development.
Za manje od godinu dana, razvili smo niz aparata za gašenje požara za razvodne ploče (rasklopna oprema), s kapacitetom gašenja u rasponu od 10 grama, 20 grama, i 30 grama na struju 40 grama.
Danas, we’d like to introduce our newly developed 40-gram DIN Rail-Type fire extinguisher breaker for distribution boards.
40G Automatic DIN Rail Fire Extinguisher Breaker
The 40G rail-mounted distribution cabinet fire extinguisher has the following two distinctive features:
The aerosol fire-extinguishing dose is 40 grama. It covers an enclosed space of 0.4 kubičnih metara.
The nozzle is designed as a large-bore nozzle, enabling the extinguishing agent to be discharged promptly through the nozzle.
Osim toga, this product has the following basic characteristics and key specifications:
Naziv proizvoda: DIN Rail Type Fire Extinguisher Breaker
Broj stavke: QRR0.04G/S/SA-EC.
Specifikacija: 80*27*70 mm (Contains 3M double-sided adhesive tape).
Volumen zaštite: 0.4 cubic metres of space in the switchboard cabinet.
Aerosol Compound Release Time: 10 do 15 sekundi.
Main Oxidant Content: Strontium Nitrate and Potassium Nitrate make up 60% do 80%.
Koncentracija dizajna: 100 grama po kubnom metru.
Volumen zaštite: 0.12m³.
Pakiranje: White box or special box design.
OEM/ODM and Private Labeling Service: Available for quantities over 1000 komada.
Način aktivacije: Thermal activation by thermal cord.
Thermal Cord Activation Temperature: 175℃.
Duljina toplinskog kabela: Leave 10 centimetres on each side (standard); this can be extended in accordance with the customer’s specific requirements.
Opseg primjene: Meter boxes, rasklopna oprema, elektro ormari, upravljačke ploče, and other confined small spaces.
Test Video of 40G DIN Rail Extinguisher and How To Install
The above outlines the basic specifications of this product. For details of its fire-extinguishing performance, please watch the following YouTube video demonstrating its use:
If you want to know how to install the din rail series of aerosol fire extinguisher, please refer to below short video:
Although this product is very practical, we would like to draw your attention to the following points:
Nakon oslobađanja, do not touch the device before the casing cools down to avoid burns.
When the ambient temperature reaches 175℃±10℃, or when the thermal cord(the blue one) comes into contact with an open flame. It will start to extinguish the fire automatically. So it works without any additional power supply. It is fully automatic.
Do not disassemble this product privately without our permission.
This product is disposable; once the contents have been dispensed, it cannot be reused and must be replaced with a new one without delay.
We are specialist manufacturers of this product. Should you have any queries, molimo ne ustručavajte se kontaktirati nas.
