Огнетушитель на DIN-рейку в настоящее время является наиболее экономичным противопожарным оборудованием для распределительных щитов.. Это потому, что, по сравнению с аналогичными продуктами, они самые дешевые.
Как специализированный производитель огнетушителей для распределительных щитов., we constantly explore new technologies and conduct research and development.
Менее чем за год, мы разработали линейку огнетушителей для распределительных щитов (Распредустройство), с огнетушащей способностью от 10 граммов, 20 граммов, а также 30 граммы на ток 40 граммов.
Сегодня, we’d like to introduce our newly developed 40-gram DIN Rail-Type fire extinguisher breaker for distribution boards.
40G Automatic DIN Rail Fire Extinguisher Breaker
The 40G rail-mounted distribution cabinet fire extinguisher has the following two distinctive features:
The aerosol fire-extinguishing dose is 40 граммов. It covers an enclosed space of 0.4 кубические метры.
The nozzle is designed as a large-bore nozzle, enabling the extinguishing agent to be discharged promptly through the nozzle.
К тому же, this product has the following basic characteristics and key specifications:
наименование товара: DIN Rail Type Fire Extinguisher Breaker
Номер предмета: QRR0.04G/S/SA-EC.
Спецификация: 80*27*70 мм (Contains 3M double-sided adhesive tape).
Объем защиты: 0.4 cubic metres of space in the switchboard cabinet.
Aerosol Compound Release Time: 10 в 15 секунд.
Main Oxidant Content: Strontium Nitrate and Potassium Nitrate make up 60% в 80%.
Концентрация дизайна: 100 грамм на кубический метр.
Объем защиты: 0.12m³.
Упаковка: White box or special box design.
OEM/ODM and Private Labeling Service: Available for quantities over 1000 куски.
Режим активации: Thermal activation by thermal cord.
Термическое шнура активации Температура: 175℃.
Длина термошнура: Leave 10 centimetres on each side (стандарт); this can be extended in accordance with the customer’s specific requirements.
Область применения: Meter boxes, Распредустройство, электрические шкафы, панели управления, and other confined small spaces.
Test Video of 40G DIN Rail Extinguisher and How To Install
The above outlines the basic specifications of this product. For details of its fire-extinguishing performance, please watch the following YouTube video demonstrating its use:
If you want to know how to install the din rail series of aerosol fire extinguisher, please refer to below short video:
Although this product is very practical, we would like to draw your attention to the following points:
После выпуска, do not touch the device before the casing cools down to avoid burns.
When the ambient temperature reaches 175℃±10℃, or when the thermal cord(the blue one) comes into contact with an open flame. It will start to extinguish the fire automatically. So it works without any additional power supply. It is fully automatic.
Do not disassemble this product privately without our permission.
This product is disposable; once the contents have been dispensed, it cannot be reused and must be replaced with a new one without delay.
We are specialist manufacturers of this product. Should you have any queries, пожалуйста, не стесняйтесь обращаться к нам.
