The warehouse consists of a storage room for materials, transportation, and transportation facilities (such as cranes, elevators, and slides), transportation pipelines and equipment for entering and exiting the warehouse, as well as fire protection facilities, management rooms, etc. It is a building that has many products.
The warehouse is divided into single-layer warehouse, multi-layer warehouse (three-dimensional warehouse), and cylindrical warehouse.
A warehouse generally stores a large amount of raw materials, semi-finished products, and finished products, which are in the form of gas, liquid, solid, and powder.
Because there are various types of materials with different properties in the warehouse, it is also a place prone to fire. If the warehouse management is improper and causes a fire, the economic losses and personal injuries will be irreparable.
A large-sized aerosol fire suppression system can be used for warehouse firefighting due to its excellent performance.
Technical Data of Thermally Automatic Aerosol Fire Suppression System for Warehouse
Hereby a 2500-gram capacity aerosol generator is the right product for the warehouse, The specific parameters of this product are as follows:
Product Name: Aerosol fire suppression system for warehouse.
Product Pattern: 2500ST.
Ignition Mode: thermal activation with thermo bulbs (glass bulbs).
Size in Millimeters: Φ219*265.
Capacity: 25 cubic meters.
Chemical Composition: 60% strontium nitrate and 20% potassium nitrate.
Quality of Aerosol Agent: 2500 grams.
Trigger: Glass bulbs with temperature range from 57 to 141 degrees Celsius.
Operation Pressure: Pressure-free.
Cylinder: 304 Stainless Steel with Artwork of Polishing.
Gross Weight and Net Weight: 11 kilograms and 2.5 kilograms.
Product Service Cycle: about ten years according to its aging test report.
Ambient Temperature: -40 to +90℃.
Humidity: more than 95% non-condensing.
The following are the main features of this product 2500ST:
The Glass bulb is a starting element with an activation temperature range of 57 to 141 ℃.
The material of the aerosol generator cylinder is high-quality 304 stainless steel with a thickness of 2 millimeters.
It is a waterproof and dustproof product, and we have an IP67 test report to prove it.
Strontium nitrate salt is the main oxidant, Potassium nitrate salt as backup oxidant.
It can quickly extinguish the fire and can extinguish it in just a few seconds.
No residue after spraying, no need to clean the warehouse.
There are 5 different aerosol activation methods to choose from, and different activation modes should be selected for different installation scenarios.
Most importantly, it does not cause any pollution to the environment and harmless to the body.
Intelligent aerosol Fire suppression systems could be able to apply in storage rooms and warehouses for fire protection, normally it is easy to install in the ceiling or on the wall by using brackets and screws.
It also can be able to apply in the following relative places:
Factory.
Hospitals and medical institutions.
Schools and educational institutions.
Government department.
Supermarket.
Industrial park.
Logistic company.
High-rise building.
Mining vehicles.
On-road vehicles.
Off-road vehicles.
Railway locomotives and rail transit.
Power equipment.
When designing, installing, and maintaining this product, check the product list and refer to the manual.
The starter parts are installed in the last step, do not break the glass bulb on the starter parts.
The installation work is carried out by professional and skilled personnel, and smoking is prohibited.
When aerosol fire extinguishers are discharged, a large amount of heat is generated, and personnel should immediately evacuate the site.
After spraying, the handling personnel should wear masks and gloves.
Enquiry Form ( we will get back you as soon as possible )
