7-gram aerosol extinguishment is almost the world’s smallest fire suppression unit in the world, its size is only a diameter of 40 millimeetrit, and its height is no more than 20 millimeetrit, such a small product almost can be installed in any small and narrow space.
Meil on palju paigaldusjuhtumeid, nagu näiteks electric meter boxes, small electrical cabinets, lithium battery cylinders, battery compartments for power exchange cabinets, small switchboards, and high-voltage cable explosion-proof connectors.
This aerosol extinguishment is an innovative technology in the fire suppression industry because of the following advantages:
See töötab automaatselt.
It has a very stylish appearance, its cylinder is specially made by one of our skilled technicians who has over 40 years of design experience.
The cylinder itself does not carry any pressure.
It is a small size, and it can make protection for every small space.
Its extinguishing agent is made up of the main oxidants of potassium nitrate and strontium nitrate, mis on rohelised materjalid.
Below are the main parameters and datasheet:
Eseme number: QRR0.007G / S / SA.
Spetsifikatsioon: φ40*H20 mm (sama suur kui QRR0.012G/S/SA)
Mount Hole Spacing: φ4*54 millimeetrit.
Product Concentration: Vähem kui 60 juurde 100 grammi m3 kohta.
Suppression Volume: ≤0,1 kuupmeetrit.
The rated Temperature of the Thermal Sensing Line is 175℃.
Releasing Time: ≤4 sekundit.
Actuator Current: More than 700mA (Alalisvool).
Ohutu vool: ≤150mA (Alalisvool).
Electric Start-up Time: Vähem kui 1 sekundit.
Ambient Temperature Range: Minimaalne -50 ℃, Maksimaalselt +95 ℃.
Service Time: ten to fifteen years.
Warranty Period: üks aasta.
Ühilduvus: It can work standalone can work with fire alarm devices, ja suudab täita Thermal Activation Devices.
The price of aerosol fire extinguishing systems varies according to different order requirements.
In terms of price, some other competitive products have appeared on the market, such as FM200, Tulekahju tuvastamise toru, Dry Chemical, jne.
Kuid, compared to others, aerosols have unique advantages and their fire extinguishing principles are also different, Seetõttu, Aerosol fire extinguishers remain a hot seller on the market.
There are some other manufacturers of aerosol extinguishing systems on the world market. but we are the only manufacturer that produces generation four (4G) advanced aerosol products based on the newest and innovative aerosol technology.
We produce an S-type strontium nitrate aerosol extinguishment system, while others produce K-type potassium nitrate aerosol. S-type aerosols are better than K-type aerosols in all aspects.
This product is becoming more and more popular and some lithium battery suppliers are very interested in it because it has the following features and characteristics:
Väike suurus.
Lightweight.
Ruumi säästmine.
Suur mahutavus.
Kiire tulekahju summutamiseks.
Surveta silinder.
Lihtne kasutada ja paigaldada.
Pikk eluiga.
Kõige tähtsam, see on CLEAN AGENT, after releasing the smoke-like gas runs out from the nozzle without leaving any residue.
However aerosol systems also have their disadvantages, see on: pärast vabastamist, the cylinder is very hot.
Seetõttu, please handle it carefully after spraying and wait until its cylinder has cooled down before moving it.
Since it is a popular fire extinguishing product, we can imagine that it can be applied in a lot of places, here we list some application places, but not limited to these places:
Elektriline paneel.
Juhtkapp.
Arvestite kapid.
the battery compartment, especially lithium-ion batteries.
Tuuleturbiinide juhtimisseadmed.
Autosõidukite juhtimisseade.
Päikesepaneelid.
Aerosol fire extinguishers are classified as Class 9.1 Hazardous Goods and therefore need to be handled with care.
When handling, storing, installing, and debugging, please pay attention to the following matters:
Igaüks (välja arvatud vanad inimesed ja lapsed) can install this product, but should be as per thePAIGALDAMISJUHEND.
Ärge võtke seda seadet kunagi lahti, meie ettevõte ei vastuta ühegi õnnetuse eestbecause of this matter.
Please do not touch the hot cylinder immediately after the extinguishing unit is sprayed.
Hoidke seda kuivas ja ventileeritavas kohas, vältige vihma ja päikest.
If you accidentally come into contact with an aerosol compound, seejärel peske käed koheselt veega.
Süsteemi silumise ajal, veenduge, et toide on välja lülitatud, to avoid activation by mistake.
Päringuvorm ( võtame teiega esimesel võimalusel tagasi )
