The petrochemical plant and its system are always at high risk of fire, we can use the Superfine Particles of Dry Chemical Fire Suppression Generator as a fire prevention solution.
Petrochemical plants are always very large and complex in their systems, in a petrochemical plant perhaps there are power distribution systems, power generator systems, cable tunnel systems, computer systems, and electrical cabinets.
The petrochemical industry is an important foundation of the national economy and has significant strategic significance for a country.
So, the matching of fire protection facilities and the installation of fire protection systems are crucial for petrochemical plants.
Technical Data of the Dry Chemical Fire Suppression Generator
Our company’s ultra-fine dry chemical fire suppression generator can be well applied in petrochemical plants. Below, we recommend the classic model FZX-ACT5/1.2:
Actuator Type: Electrically 3 to 24 Volts and Thermally.
This product has the functions of thermal cord wire starting and thermo bulb starting, and the normal starting temperature of the thermal cord wire is 175 degrees or 300 degrees; The starting temperature of the glass bulb is 57℃, 68℃, 79℃, and 93℃.
Under special circumstances, the rated temperature can be customized.
This super-fine dry Chemical fire suppression generator FZX-ACT5/1.2 has the following advantages and features:
The spraying of ultrafine dry powder is relatively uniform and can effectively extinguish flames.
It can be applied to high-temperature and humid environments and is very flexible.
Ultra-fine fire extinguishing agents have small particle size, good fluidity, good resistance to re-ignition, and electrical insulation properties.
It can be used alone or in combination with multiple devices to form a non-pipe network fire extinguishing system.
This product has multiple starting methods, electric starting and hot starting.
The application range of ultra-fine dry powder fire extinguishing devices is wide, and they are suitable for various types of fires, such as common industries such as petroleum, chemical, electronics, printing, wood, etc.
Compared to other types of fire suppression systems, the biggest advantage of ultra-fine dry powder fire extinguishing systems is that they can be installed in open protected areas. The following are its application ranges:
Petrochemical plant.
Oil depot.
Shipping Terminal.
Power plant.
Underground Garage.
Airport.
Subway and stations.
Gymnasium.
Convention Center.
The Cinema.
Shopping arcade.
Archives.
Cable Tunnel.
Pump station.
Underground Pipe Gallery.
Computer room.
Please note the following when debugging, installing, and repairing the ultrafine dry powder fire extinguishing system:
Please hire professional technicians or installers to carry out the work, and wear gloves and masks during the operation.
During installation, operators should not smoke to prevent ignition of the hot start components of the fire extinguishing device.
Except for operators, all unrelated personnel are prohibited from entering the installation and commissioning site.
Before installation and debugging, please check the product list, read the operating manual, and understand the precautions that need to be taken.
Enquiry Form ( we will get back you as soon as possible )
