Pressurized Super-fine ABC dry chemical powder fire extinguishing system for the cable trench, electricity power industry, power generator rooms, warehouses, parking lots, electrical cabinets and control panel rooms, UPS rooms, and EPS rooms.
The pressurized ABC powder fire extinguishing system can be applied in cable layers, cable trenches, cable shafts, and other places. It can well dissolve the fire hazards in these areas.
Due to the dry powder is not conductive, extinguish the fire quickly. A lot of ongoing engineering cable trench projects are using an ultra-fine dry powder fire extinguishing system as the first choice.
You can install one set of dry powder fire extinguishing units in a cable shaft, or you can install multiple sets of dry powder fire extinguishing units in a cable trench.
In conclusion, in a special enclosed situation such as a cable trench, we strongly recommend that you install a dry powder-type fire suppression system.
It is more flexible and is mostly used in unoccupied places (or sparsely populated places) such as:
Cable Trench and cable well.
Computer room.
Data processing room.
Generator room.
Underground pipe gallery.
Wind turbine.
Vehicle Engines, etc.
However, because the extinguishing agent of this product is dry powder or ultra-fine dry powder, which is not fatal to the human body, it can also be installed in ordinary places such as:
In conclusion, you can see that dry powder systems are widely used in every aspect and are the most popular non-gaseous type of fire extinguishing system.
Below, we take 6kg of dry powder fire extinguishing agent as an example to introduce its specific configuration.
Technical Data of ABC Dry Chemical Powder Fire Extinguishing System
Lot Number (Batch Number): FZX-ACT6/1.2.
Trigger Style: Electrical power supply activation.
Wire Connection: Operate together with the fire alarm system (including gas fire control panel, heat detectors, smoke detectors, beam detectors, fire indicators, and manual call points), and can work stand-alone with a separate thermal activation generator.
Powder Coent: ABC-type dry chemical.
Particle Size Type: ultra-fine powder.
Cylinder Filling Weight: 6000+300 grams.
Product Diameter: 319 mm.
Product Height: 300 mm.
Coverage Volume: 46 cubic meters.
Protection Area: ≤25 square meters.
Working Environment Temperature: -40℃ to +70℃.
Ambient Humidity: ≤98% non-condensing.
Fire Extinguisher Residual Rate: ≤5%.
Drive Gas Cylinder Pressure: 1.2 MPA (at 20℃).
Maximum Operating Pressure: 2.4 MPA.
Product Service Cycle: 5 years based on the results of accelerated aging testing.
Dry powder fire extinguishing systems are more flexible in terms of installation scenarios than aerosol fire extinguishing systems, because dry powder can extinguish fires in open spaces, whereas aerosols have limited effectiveness in extinguishing fires in open spaces.
Please refer to the following animated video of a dry powder suppression system extinguishing a cable trench fire:
Its main features are as described:
Little damage to the atmosphere, so it is eco-friendly.
Good appearance.
Long life span of more than 5 years.
Easy to sweep up after discharging.
Non-toxic, non-corrosive, non-conductive, and no residue after discharging.
Easy to operate and install, simple to do the system debugging.
Work both automatically and manually.
High efficiency in fire suppression and extinguishing.
Low in maintenance.
It can be used in narrow places such as cable trenches, cable shafts.
Work both total flooding and local application available.
Installation scenarios are flexible. It can be used in both closed and open spaces.
It has a wide range of applications, hereby below we list out part of them:
Tobacco warehouse.
Power generator room.
Gas filling station.
Utility tunnel.
Hospital and health-care center.
Restaurants and hotels.
Computer rooms.
Telecommunication base station.
Factory workshop.
Oil refinery.
But it can't be used in clean places, such as clean rooms, magnetic resonance rooms in hospitals, and so on.
We have more fields and documents for your reference:
Catalogue and Brochure.
Flyer.
Technical Data Sheet.
Material Safety Data Sheet.
Installation case.
Certificates and approvals.
If you want to know more details about our products, please contact our salesman or technician.
Enquiry Form ( we will get back you as soon as possible )
