The fire detection tube, also named detecting fire tube, is a main component for tube-type fire suppression systems, it enables the fire extinguishing system to operate automatically.
The main models are: 6*4 mm, hereby 6 is outer wall diameter, 4 is inner wall thickness; or 8*6 mm, hereby 8 is outer wall diameter, 6 is inner wall thickness.
The 6 and 8 millimeter red fire detection tube is a main accessory for the detection tube fire suppression system, this small red pipe has a great effect, it can serve as both a detector and a delivery pipeline for fire extinguishing agents.
Usually, during installation, the fire-detecting tube is wrapped inside the distribution cabinet to automatically detect and extinguish fires.
The red tube-style fire detection cable is generally used in conjunction with fire extinguishing cylinders, pressure gauges, alarms, and plugs to form a complete fire extinguishing system.
The main material used to make it is a high-strength, high-tenacity plastic-PTFE nylon
TECHNICAL SPECIFICATION
Now let’s introduce the characteristics of this fire protection accessory:
Name: Tube fire suppression system for fire suppression.
Model: 6*4 mm or 8*6mm.
Length of the tube: 100 meters per roll.
Material: Semi-Flexible Polymer for Fire Detection.
Working pressure: 15 Bar or 1.5 Mpa.
Tensile strength: ≥30N/mm2.
Burst pressure: 60 Bar.
Bending radius: 80 or 100 mm.
Ambient temperature: -20 to +60℃.
Burst temperature: 100℃.
Activation temperature: 160/170℃±10℃.
Other temperature range available: 90℃±10℃, 110℃±10℃, 140℃±10℃.
Color: Red or Black.
Minimum bending radius: 100 mm.
Application: for fire suppression and fire detection purposes.
The above fire extinguishing tubes need to be matched with gas cylinders, If you need a fire tube-type Automatic fire suppression system without a bottle, please refer to the following:
Below is the table, there are more models for your choice:
Item
Size in mm
Outer Diameter
Inner Diameter
Working Pressure
Working Temperature
Tube Color
FDT001
6*4
6
4
1.5 Mpa
170±10℃
Red or Black
FDT002
8*6
8
6
1.5 Mpa
150±10℃
Red or Black
FDT003
10*8
10
8
1.6 Mpa
140±10℃
Red or Black
FDT004
18*13.6
18
13.6
2 Mpa
120±10℃
White
FDT005
30*25
30
25
2 Mpa
120±10℃
White
***
APPLICATION
Many fire protection systems require this pipe:
Carbon Dioxide Type.
FM200 Type.
NOVEC 1230 Type.
Ultrafine ABC dry chemical Type.
This fire detection tube is now frequently installed in various Gaseous fire suppression systems, It is used in power distribution cabinets, car engines, and engines, Let's list its features below:
It has two functions: fire detection and fire extinguishing.
The flexibility of pipes is very strong, In an environment of 55 degrees, there is no softening or deformation phenomenon; In an environment of -20 degrees, there is no fracture phenomenon.
Two or more colors to choose from, red, black, and others.
multiple detection temperature ranges are available, including 110 degrees, 140 degrees, 170 degrees, etc.
Fire detection is very sensitive. Once a fire is detected, the red pipe will burst immediately.
The pipes are very small and do not occupy protective space.
Strong fire resistance and pressure resistance.
The fire detection tube complies with EU standards and has an EU CE certificate with CE marking.
Because it is a supporting component of the fire extinguishing system, wherever a fire extinguishing pipe is used, it may become its application scope:
Wind turbine.
Control panel.
Electrical cabinet.
Engine bay of vehicles.
Lithium battery pack.
Energy storage container systems.
Power room.
Generator room.
Although the fire detection tube is a small accessory, the following precautions should be taken when using it:
Check that there is no leakage from the fire detection tube.
Tighten the screws when connecting to the steel cylinder to avoid gas leakage.
Do not fold the fire detection tube 180 degrees to avoid breakage.
After installing and debugging the fire detection tube, the system needs to be checked again to avoid any mistakes.
Enquiry Form ( we will get back you as soon as possible )