Aerosol-based extinguishing devices are an ideal choice for fire suppression in CNC machinery spaces as they do not cause any damage to the machinery engine.
Introduction of CNC Machine and CNC Machine Fire Protection Device
Before officially introducing our CNC machine fire protection device, let’s first get to know CNC machine.
CNC machine is short for “computer numerical control machine tools”, it is an automatic machine tool equipped with a program control system, CNC machine tools better solve the problem of complex and precise parts processing,
CNC machine tools have better solved the problem of complex and precise parts processing, is a flexible and efficient automatic machine tools.
It represents the development direction of modern machine tool control technology and is a typical electromechanical integration product.
However, according to the survey, CNC machines also often get thermal run-away and catch fire, especially large ones, they are easier to catch fire and have huge losses.
For fire protection in the CNC machine, there is a reliable product called “Minisol aerosol fire extinguishing device“, which can be installed inside the CNC machine and not affect their operation.
CNC MACHINE FIRE PROTECTION DEVICE SPECIFICATION
The main technical parameters and performance indicators of this fireproof product are as follows:
Use Purpose: for fire suppression.
Pattern Number: 250 grams or 500 grams.
Specification: Diameter 168 mm, and height is adjustable.
Extinguishing Capacity: 2.5 m³ or 5 m³.
Compound Releasing Time: 12 seconds.
Design Concentration: 100 to 130 grams per cubic meter.
Fire Type: Class A, B, C, E, F.
Boot Model: Glass bulb actuator and electronic power.
Sensing Temperature: 175℃.
Input Current Index: 1 A.
Input Voltage Index: 3 to 24 volt DC, 3 to 220 volt AC.
The fire protection job for CNC machines is optional, some machines with high value can be equipped with fire extinguishing devices, while some machines with low value or many years can choose not to install.
STEPS TO INSTALL THE AEROSOL GENERATOR IN THE CNC MACHINE
How to install the aerosol fire protection device in the CNC machine? below are the steps:
Open the internal cover or door of the machine to check the suitable position for installation.
Find a relatively open place and prepare for installation.
Install the aerosol fire extinguisher into the clamp, and then tighten the screw of the clamp.
Connect the bracket and clamp with the connecting rod.
Fix the mounting bracket on the top or wall of the machine.
Adjust the direction of the nozzle of the aerosol fire extinguishing device, and align the nozzle with the machine parts.
Finally, install the alarm device and connect it to the fire extinguisher.
The aerosol fire extinguishing system is widely used worldwide and has unique features, which sets it apart from gas and dry powder fire extinguishing systems.
Here are the advantages of the product:
It does not require any pressure, pipe network, manifold, or nozzle, making it easy to use.
When stored, it is solid and pressure-free, and there is no need to install a pressure gauge, which is very safe.
The particles it produces during spraying are small and uniform, similar to smoke and gas, and can cover the entire protective space 360 degrees without any dead corners. This makes it efficient in quickly extinguishing fires.
The fire extinguishing agent is made of environmentally friendly materials and leaves almost no residue after spraying. It is also safe to use in electrical equipment and precision machinery.
The concentration of the agent can reach 50 to 100 grams per cubic meter, with extremely high fire extinguishing efficiency.
Compatible with the fire alarm system, it has a brotherly and cooperative relationship with the alarm system.
The aerosol cylinder system is a highly targeted fire protection product that proves to be effective and economical in various applications.
Here are some areas where it can be applied:
Rolling rigs.
Gearbox.
Drilling machine.
Agriculture machinery.
Capacitor bank.
Lifting equipment.
Specialty vehicles.
Off-road vehicle engine.
Tunneling equipment.
Bus passenger compartment.
Gas turbine enclosures generator rooms.
Power rooms.
Grinding mills.
Electric machine rooms.
Maritime vessels.
Power generation, transmission, distribution, and consumption equipment.
Transportation tools.
Please note the following precautions when using an aerosol system:
Do not use aerosol systems in crowded areas such as bus stations, train stations, hotels, or high-rise buildings as the release of aerosols may cause suffocation.
The cylinder of the aerosol generator will be very hot after aerosol spraying, please be careful not to burn the bodies of on-site personnel.
During storage, keep the aerosol system in a dry and well-ventilated warehouse. The indoor temperature should not exceed 40°C.
Enquiry Form ( we will get back you as soon as possible )
