Nog twee manieren om Minisol-aërosolgeneratoren te installeren

Description of our Extinguishing nozzle on the Minisol aerosol generators

The extinguishing nozzles of Minisol are set in two locations, één locatie bevindt zich aan de onderkant van de aerosolgenerator, en een andere locatie bevindt zich bovenaan het aërosolapparaat, normaal houden mensen van het mondstuk aan de onderkant, but some special projects require a magnet with 3m glue to install, dan moet het blusmondstuk alleen op de bovenkant van de aerosolgenerator worden geplaatst;.

Normally if the extinguishing nozzles are set on the bottom of the aerosol, then use an installation bracket to install it if the extinguishing nozzles are set on the top of the aerosol, gebruik vervolgens magneten samen met 3M-lijm om te installeren, but you also can choose to have installation bracket.

The first way to install Minisol aerosol generators – Door gebruik te maken van montagebeugel en schroeven

This is the best way to install ons aerosolapparaat in many projects in the wind power room, generator ruimte, mobiele motor, and machines, normally people purchase our product we use an installation bracket, the advantage of using an installation bracket is the aerosol generators can be firmly anywhere, om te voorkomen dat het eraf valt na installatie;.

Dus als het blusmondstuk aan de onderkant zit, gebruik deze installatiebeugel beter!(met schroeven) installeren.

The installation bracket is made up of stainless steel iron and it is strong and anti-corrosion, by using it you do not worry about it getting corrosion.

Installation brackets include “U-shaped” en “L-shaped” brackets, please see the photos showing:

• Minisol aerosol generator -1
• Luchtvaart stekkers -2
• Kabel draad -3
• Ronde hoepel -4
• Beugel connectoren 1 -5
• Beugel connectoren 2 -6
• L-vormige installatiebeugel -7
• Platte pad -8
• veerkussen -9
• Zeshoekige schroeven -10
• U-shape installation bracket -11

Normally for a small size of minisol aerosol, use an “L” vorm een ​​installatiebeugel, and for a medium or large size of minisol aerosol, then use a “jij” vorm een ​​installatiebeugel.

The second way to install Minisol aerosol generators is by using magnets with 3M glue

This is the special way to install our aerosol generator in some projects that are not suitable to use the installation bracket to install, maar geschikt om magneten mee te gebruiken 3M lijm installeren.

Bij het gebruik van magneten met 3M lijm om de blusnozzles van de spuitbus aan de bovenzijde te plaatsen, and the protection object must be with the material of iron or stainless steel so that the magnetic and 3M glue can be adhered to it.

The advantages of using magnets with 3M glue is also easy to install, but not as firmly installed as by using an installation bracket, so if not for special projects, then use an installation bracket, but for some special projects better to use magnets and 3M glue to install, dan zullen we een speciale suggestie geven:.

Nowadays aerosol fire suppression device is recognized worldwide and many engineering and installation companies and firefighting enterprises think aerosol suppression is a good fire protection solution for them, so they like to design aerosol systems for their ongoing projects.

Different Installation Modes

The following industries or fields are places that require a Minisol fire suppression device with different installation modes:

• Windenergie-industrie, the wind turbine nacelle, besturingskaart, en elektrische kasten.
• Transport en vervoer, Bus, coaches, vrachtwagens, auto's, and some other heavy-duty vehicles, bijvoorbeeld, our car needs to install a fire suppression system, we suggest installing our aerosol suppressant generators inside the car engine, with the capacity of covering 1.5 tot 2.5 Kubieke meters.
• Communicatie-industrie, in the communication industry there are many electrical equipment cabinets, control boards, and electronic boxes that need to be protected by a small fire suppression device, zoals aerosol.
• Energie industrie, The power industry includes wind power, power generators, machtsverdeling, and many electrical cabinets are over there.
• In public places and municipal facilities, such as power distribution cabinets, tunnels, bruggen, gas supplies, water supplies, and power supplies, the electronic equipment also may require a small aerosol fire suppression system to protect it.
• Offshore platformindustrie, a transformer room in an offshore platform always needs such small fire suppression system to protect it, zoals deze spuitbus.
• Batterij-industrie:, Nowadays new energy is developing so fast, and people have great requirements for battery products, so now some companies have been researching to install a small fire suppression generator inside a battery space, en onze spuitbussen kunnen.
• Bouw Industrie, een zwakke stroom en een zware stroomcontrolekamer in gebouwen zal mogelijk zijn om een ​​aërosolbrandblusapparaat te hebben om bescherming te maken.
• anderen, we can not be able to list all but we can imagine this small aerosol fire extinguishing device is be able to applied everywhere.

About Bracket Installation

So industries and fields better use Brackets to install, and some better use magnets and 3M brand glue.

Om de installatiemethode te gebruiken, kunt u het beste eerst bij ons informeren, and tell me some basic information about the following:

• Naam van het project, dit is om te weten waar het apparaat te installeren.
• Welke functie wil je?, automatisch, handmatig, or both of them?
• Installatie Omgeving en omgevingstemperatuur vereist.

After we get your inquiry we will ask you for the basic information and then will require you to give us more information, de informatie, waaronder een van de volgende::

• Project drawings in DWG format or PDF or in JPG format.
• Lijsten met vereisten voor projectmateriaal (Offerte aanvragen).
• Afmeting en specificaties:.

After that we will send an inquiry to our design department in the company and the technician will work out a fire solution for your project.

We are an efficiency-oriented manufacturing company and we design, produceren, engineer, and install a variety of our fire suppression systems and their devices: aërosol, FM200, ig541, CO2, droog chemisch poeder, LABEL, enzovoort.

We are an efficiency-oriented manufacturing company and we design, produceren, engineer, and install a variety of fire suppression systems and their devices: aërosol, FM200, IG541, kooldioxide, droog chemisch poeder, LABEL, enzovoort.

Referenties

• GA499.1-2010, Aerosol Brandblussystemen – Gecondenseerd aërosolbrandblusapparaat.
• NFPA 2010, Standaard voor vaste aërosolbrandblussystemen.
• ISO 15779, Brandblussystemen met gecondenseerde aërosol.
• ANSI/UL 2775, Standaard voor vaste gecondenseerde aërosolblussysteemunits.
• CEN / TR 15276-1/2, Vaste brandbestrijdingssystemen – Gecondenseerde aërosolblussystemen.
• KIWA-k23003 Brandblussystemen op basis van droge aerosol.

Innovatieve technologie automatische brandblussystemen voor onderstation elektrische stroomverdeling kamer schakelaar transformator