The tiny fire suppression aerosol generator is an excellent automated fire suppression tool for EV charging piles. Because this product is small and automated, it can be installed inside the charging post completely and utterly.
This product uses thermal start (thermal cord wire) as the main principle of starting. However, if you need to connect BMS and EMS to the charging post, you need to use an electric start function also.
The mounting of this product is simple, using 3M double sided tape mounting (or 2 M4 size screws). This is the most portable fire extinguisher for charging posts with complex internal circuits and small internal spaces.
As you can imagine, a lot of charging posts are built every year all over the world, and a lot of them suffer from the threat of fire.
There are a lot of electrical components and lithium batteries in charging piles, and this tiny fire suppression aerosol generator is also effective for lithium battery firefighting.
Well, this is the best opportunity to develop a charging post fire extinguishing device, and you can recommend this charging post fire extinguisher to battery suppliers, charging post manufacturers, and distributors.
You can present the potential selling points of this product to the buyer (customer):
- The small size of the product allows you to find the right remaining installation space in the charging post.
- Automated fire detection and automated activation of extinguishing elements.
- Installation is simple. You just need to tear off the double-sided adhesive protective film and stick it in the right space inside the charging pile cabinet.
- The fire extinguishing agent is purely clean and leaves no residue after spraying and releasing, without harming the machine.
Combined with the market demand and product benefits, we believe that this product will soon have a huge sales potential.
Key Parameters of Tiny Fire Suppression Aerosol Generator
Below, we share with you the key parameters of this product so that you can better understand its configuration of this product:
- Product Name: Small-sized aerosol fire extinguisher.
- Usage: Fire suppression on charging piles.
- Model: AW-QRR0.03G/S/SA.
- Aerosol Capacity: 30 grams.
- Protection Volume: enclosure space of 0.3 cubic meters.
- Actuator Mode: Thermal Cord, Electric Start, or Both activation modes combined.
- Thermal Cord Length: 0.3m (adjustable).
- Electrical Activation Wire Length: 0.3m (adjustable).
- Input Power: 3 to 24 VDC.
- Resistance: 2-3 Ω.
- Thermal Rated Temperature: 175℃ (It also activates automatically in the event of an open fire).
- Mounting: special 3M double-sided tape (or 2 M4 screws).
- Ambient Temperature: -40℃ to +95℃.
- Relative Humidity: 95% non-condensing.
- Internatioanl Standard: GA499.1-2010, NFPA2010, UL2775, ISO15779.
We have more similar models and products, Please contact us for a specific catalogue.
This product is very effective for the protection of small enclosed spaces. We list some classic cases below:
- Charging Point (Charging station).
- Lithium Batteries.
- Energy Storage Cabinet.
- Electric Box.
- Meter Box.
- Machinery Equipment.
- AMF Panel.
- Modular Rectifiers.
- String Combiner Box.
- String Monitoring Box.
- Solar AC Distribution Panel.
- Solar LT Metering Panel.
- AC Wallbox Charger.
- EV Charger.
- E-bikes.
- Electric Motors.
- Electric Vehicles.
- E-scooters.
In short, it's perfect for protecting tiny areas and enclosed spaces.
Please note the following when installing a charging post fire extinguisher:
- Before installation, understand the internal structure of the charging pile, wiring layout, and space layout, and pick the most suitable installation location.
- Installation begins with disconnecting power to the charging post to ensure the safety of the installer.
- Installation can be selectively mounted with 3M double-sided tape or screw-fixed mounting.
If you have any other doubts, please do not hesitate to contact us.
