10 KG Aerosol Automatic Fire Fighting System AW-QRR10LW is a large-sized fire extinguishing system covering 71 cubic meters of closed space.
This fire extinguishing system is capable of flooding the entire fire protection zone in under 60 seconds, enabling fast and precise fire extinguishing.
The 10 kilograms of floor-type aerosol automatic fire-fighting system can protect 71 cubic metres of enclosed space.
According to international and national fire safety standards, we have designed it to have a concentration of 100 grams to 140 grams per cubic metre. This is an excellent fire extinguishing capacity.
So it can be used like other gas fire extinguishing systems in defence zones with large space, for example, the following defence zones are within its fire extinguishing range:
Computer Rooms.
Power Rooms.
Telecommunication Facilities.
Control Rooms.
Engine Rooms, etc.
If you don’t want to complicate the installation, then you should use this 10 KG aerosol automatic fire-fighting system, because it doesn’t require a pipe network to work and storage pressure to work.
When you do the installation work for it, you only need to perform the following steps:
Place in an open area of the room near mechanical equipment or in a corner of the room.
Direct the nozzle (shutter) of the extinguishing device towards the object to be protected.
Connect the starter wires and pressure switch wires, and connect the alarm system.
Aerosol fire extinguishers are so easy to install that many engineering and construction companies prefer to use aerosol systems as their primary construction solution.
What makes you even more impressed is the fact that this product is maintenance-free for its 10-year lifespan after installation, which is heart-saving and cost-saving.
Therefore, this product is excellent, convenient, and cost-saving in terms of fire protection.
Parameters of this Aerosol Automatic Fire-fighting System
The following are the parameters of this 10 KG aerosol automatic fire-fighting system:
Product Model: AW-QRR10LW/S.
Operating Temperature: -40 to +70℃.
Environmental Humidity: ≤95% non-condensing.
Designed Density: 100-140 grams/m³.
Working Voltage: DC 6~24Volts, or AC 6~220Volts.
Working Current: 1A/5ms.
Safety Current: ≤150mA/5min.
Operating Current: ≧250mA/5ms.
Size: 610*310*690 millimeters.
Cover Area: 71 m³.
Mass of Aerosol Chemical: 10000 grams.
Trigger Mode: Electrical or Electronics.
Color: Milk White, Red, or Black.
Cylinder: Steel with polishing.
Outlet Temperature: 175±5 degrees Celsius.
Gross Load: 54 kilograms.
Net Load: 10 kilograms.
Life Span: 7 to 10 years.
Type of Fire: A, B, C, E.
Delivery Time: 8 to 10 days after full payment or deposit payment.
Because of the popularity of various aerosol standards around the world, floor-standing aerosols are now being used in a wide variety of projects, large and small.
If you are a fire engineering company, an installation company, or a construction company, please contact us in time if you have a project purchasing need, and we will give you the best offer.
This product is one of our classic models, designed by a veteran technician with more than 20 years, using the design inspiration of air-conditioning exterior units.
This product has the following features:
Green product with ODP=0,ALT=0,GWP=0, environmentally friendly.
Non-toxic, Non-corrosive, Non-Conductive, No residue after suppression.
easy to install, place it on the corner of the floor, and with the correct wire connection.
No pressurized, the cylinder and aerosol powder don't need any pressure to work.
high quality with new and innovative technology in the fire extinguisher industry.
Stand-alone systems and other power systems work.
Newest Aerosol Fire Technology.
Low in Maintenance every year, no need for yearly inspection.
high efficiency in fire extinguishing and suppression for fire-fighting.
This product is suitable for defence zones where there is plenty of space left.
Automatic Aerosol Fire Extinguishing Device System AW-QRR10LW can completely eliminate fire hazards in the defence zone, and it is a non-pressure fire extinguishing system with excellent performance.
It can be used in computer data center rooms, processing rooms, museums, libraries, communication rooms, power generator rooms, transformer substations, distribution substation rooms, switch rooms and switchgears, electrical control rooms, oil storage rooms, flammable liquid storage, and factory workshops.
it can apply in the following industries, but is not limited to them:
Wind Power industry.
Communication Industry.
Transportation Industry.
Petroleum and Petrochemical Industry.
Construction Industry.
Metallurgy Industry.
Mining Industry.
For more application ranges, please refer to our catalogue and installation manual.
When installing, maintaining, and commissioning this product, please pay attention to the following matters:
This product is heavy, so install it by moving it to the desired mounting location before doing any other wiring.
The product extinguishing agent is relatively large, up to 10kg. So, please make sure to cut off the circuit first when wiring.
When installing, ensure that no obstacles are blocking the nozzle at 1 metre.
Keep the room dry. Keep fire extinguishing agents in a dry condition to extend the life of the device.
The biggest problem encountered during installation, commissioning, and maintenance may be electrical and wiring problems, and professional assistance should be sought for installation.
We can provide technical guidance remotely.
Enquiry Form ( we will get back you as soon as possible )
