2.5 Hệ thống chống cháy FM200 của MPA Nội các không

Các 2.5 MPa cabinet FM200 Fire Suppression System is a moderate-pressure, pipeless, and clean gas extinguishing system.

It has two main features:

• simplified structure.
• easy installation.

Its structure is indeed very simple, the main main city part of this system is only bonded to the following components:

• Storage Container.
• Container Valve.
• Solenoid Valve.
• High-pressure hose (extinguishing agent delivery hose).
• Công tắc áp suất.
• Releasing Nozzle.
• Fixed Clamps.
• Cabinet for cylinders.

Quan trọng hơn, the parts are assembled into a whole.

Kế tiếp, we can make the whole cabinet type heptafluoropropane fire extinguishing device work properly by doing the following actions:

• Fill the extinguishing agent storage bottle with the rated extinguishing agent and with nitrogen gas(khí thí điểm).
• Wire the fire suppression unit to the alarm control system. (Ghi chú: Do not leave extinguishers energised.).

You see, the job of installing and assembling a complete cabinet pipeless fire suppression system is so simple.

Các 2.5 MPa storage pressure makes this system safer than the 4.2 MPa and 5.6 MPa systems. It is more in line with the humanised design.

It is also well suited to serve small to medium-sized containment areas and individual containment areas. Ví dụ: phòng máy phát điện, phòng phân phối, phòng pin, container lưu trữ năng lượng, hầm ngân hàng, mobile equipment cabins, vv.

There is no doubt that this integrated ductless fire protection unit simplifies the installation process and reduces costs. It is a fire suppression system that can be adopted and recommended by fire companies and building installation companies.

Main Technical Parameters of 2.5 Hệ thống chống cháy FM200 của MPA Nội các không

The main technical parameters of this simple gas Heptafluoropropane system are as follows:

• Mẫu có sẵn: GQQ40, GQQ70, GQQ90, GQQ100, GQQ120, GQQ150, GQQ180.
• Cylinder Capacity: 40L, 70L, 90L, 100L, 120L, 150L, and 180L.
• Khối lượng chữa cháy: as per design.
• Combination of bottle sets: double cylinder sets or single cylinder sets.
• xi lanh Chất liệu: Thép Carbon sơn màu đỏ. The cylinder bears a steel stamp.
• Agent Discharging Time: 10 giây.
• Start-up delay: 0 đến 30 giây.
• Maximum Single Protection: 800 m2( for area), 1600 m3(for volume).
• HFC-227ea Storage Pressure: 2.5 MPa or 25 Quán ba.
• Áp lực làm việc tối đa: 4.2 MPa.
• Start-up Power: 24VDC.
• Gas lái xe: nitơ.
• Pressure Storage Method: Internal pressure storage.
• Nhiệt độ làm việc: 0 đến + 50 ℃.
• Độ ẩm tương đối: 95% không ngưng tụ.
• Tiêu chuẩn: GB16670-2006 etc.

The above is the basic parameter; for the specific specification of this series of products, Vui lòng tham khảo Annex Table One và Annex Table Two at the end of this page.

This cabinet-type Heptafluoropropane fire protection system is also very flexible. We can remove the cabinet when the code requires that the cabinet cannot be used, or when you don’t like that this product comes with a cabinet. At this point, we directly have this system’s extinguishing agent cylinders connected to the fire protection network, thus turning it into a 2.5 MPa mini-network gas fire system.

For more details about this Cabinet Type FM200 fire suppression system, Vui lòng tham khảo Hướng dẫn cài đặt.

Annex Table One – Single-Cylinder Cabinet Type FM200 Fire Suppression Device

Annex Table Two – Twin-Cylinder Cabinet Type FM200 Fire Suppression Device

The following short video shows you the fire suppression performance of a cabinet-mounted Heptafluoropropane fire suppression system: