30G aerosol fire sticker is a round and automatic fire extinguisher, mainly for protecting confined spaces of no more than 0.3 kubikmeter.
The thermally-activated generator uses condensed aerosol compound as the extinguishing medium.
It works automatically by triggering the thermal sensing cord. You can ignite the product’s thermal wires (värmesladdar) to activate the fire extinguishing device.
You can apply it in three main places as follows:
- Car Engine.
- Elskåp.
- Litium batteripaket(rack or cabinet).
30G Aerosol Fire Sticker for Car Engine
A car’s engine compartment has a relatively small space, and most of it is taken up by the engine and other car spare parts, so there is no more than 0.3 cubic metres of space left in the compartment.
In this case, we concluded that the engine compartment is very suitable for the installation of this 30g fire extinguishing sticker product.
The 30g fire extinguishing sticker will have sufficient capacity to extinguish fires caused by small car motorer.
30-Gram Aerosol Fire Extinguisher for Electrical Cabinet
Distribution cabinets come in many sizes, this product is only suitable for distribution cabinets with a volume of less than 0.3 cubic metres or less. This is because the fire extinguishing capacity of this product is limited to a maximum of 0.3 cubic metres.
It can automatically detect fires of less than 0.3 cubic metres and perform automated, unmanned firefighting actions.
Kapacitet 0.03 Kilograms Aerosol Generator for Lithium Battery Pack or Cabinet
As you know, the space of an energy storage PACK or storage cabinet with batteries is also enclosed. And in most cases, its space is roughly between 0.3 cubic metres.
So we can recommend that you install this fire extinguishing sticker product on the energy storage PACK or in the energy storage cabinet. Protect the daily safe operation of the energy storage system.
Basic Technical Parameters of 30G Aerosol-Based Fire Extinguisher
This 30g fire extinguishing sticker is a round black product with thermal wires on the left and right sides and 3M double-sided tape on the bottom.
Here we come to know its basic technical parameters:
- Produktens namn: 30G aerosol fire sticker.
- Item Numbers: QRR0.03G/S/ST-G2.
- Dimensionera: Dia at 80 mm, Height at 32 mm.
- Kapacitet: 30 gram.
- Täckningsvolym: 0.3 kubikmeter.
- Urladdningstid: handla om 4 till 5 sekunder.
- Activation: Thermal cord or thermal wire.
- Thermally Activated Temperature: 175±10℃.
- Product total weight: 0.16 kilogram.
- Color of the product: Svart (popular), Röd, or pink.
- OEM service: Accepted.
- Installation: 3M double-sided adhesive paste installation.
- Spout position: left and right sides.
- Number of nozzles: 6 till 8.
- Omgivningstemperatur: -40℃ till +95 ℃.
The 30g round fire extinguisher stickers are the classic and popular ones. if you need a square model, please go to another page to check out the square fire extinguisher.
Aerosol fire patches are based on a new generation of aerosol release technology. It completely surpasses the traditional sense of fire extinguishing devices.
Dess egenskaper är följande:
- Its size is relatively small, med en diameter på endast 80 mm and a thickness of only 32 mm, a size that is ideal for installation in small spaces.
- Compared to conventional extinguishing agents, aerosol fire extinguishing agents are highly efficient and are designed to achieve a concentration of 100 g/m3. Med andra ord, endast 100 g of extinguishing agent is required to extinguish a fire in a space of 1 cubic metre.
- The fire extinguishing agent adopts nano environmental protection technology, with no residue, no pollution, och ingen korrosion.
- The product comes with an auto-detection and auto-start function, eliminating the need for manual operation.
- Detection harness thermal wire sensitive, it can respond quickly and promptly activate the fire extinguishing device.
- Flexible installation. It has 3M double-sided tape on the back, just tear off the double-sided tape and stick it on the surface of the protected object.
- It is pressureless, so it is very safe during installation and use.
The benefits of aerosol fire suppression technology go far beyond those listed above. Its widespread use is due to people gradually discovering the benefits of this firefighting technology.
If you want to know the details of this product, please feel free to contact us.
The 30g aerosol sticker has only one type of automatic start - hot start (thermocline start) - so it is suitable for situations where only an automated start is required:
- Energiförvaringsskåp.
- Energy Storage Pack and Rack.
- Elskåp.
- Control Panel.
- Meter Box.
- Motorcycle.
- Motorbike.
- Car Engine.
And, it's less useful for open spaces or spaces with larger openings.
Så, when installing it, it's incredibly important to make sure that the space is closed or 90 percent closed.
This product belongs to the category of dangerous goods; do not just give the children to play with.
Do not dismantle this fire extinguisher without the manufacturer's permission.
För mer detaljer, please refer to our user manual.
